Fob Front Female, Fob Front Male & Fob Back:
Layer Height: 0.2 mm
Infill Density 20%
Infill Pattern: Cubic 
Nozzle Temperature: 195°C
Build Plate Temperature: 50° C
Build Plate Temperature Initial Layer: 80° C
Initial Layer Flow: 100%
Print Speed: 30 mm/s
Initial Print Speed: 10 mm/s
Retraction Distance: 3 mm  
Retraction Speed: 30 mm/s
Build Plate Adhesion: None
Make Overhang Printable: True
Material: 3D Solutech Real Blue PLA Filament 1.75 mm
Bed:  Peopoly plate
Post Processing: None
Notes:  Increased Z-offset by 0.3mm and increase bed tempearture to get smoother surface finish.  Tried to locate model on most pristine portion of bed.

Cradle, Cradle Base & Cradle Front Panel:
Layer Height: 0.2 mm
Infill Density 15%
Infill Pattern: ZigZag  (ZigZag pattern uses less retraction, helps prevent Prusement clogging)
Nozzle Temperature: 225°C
Build Plate Temperature: 65° C
Initial Layer Flow: 100%
Print Speed: 40 mm/s
Initial Print Speed: 10 mm/s
Retraction Distance: 2 mm  (Retracton modifications help prevent Prusement clogging)
Retraction Speed: 30 mm/s
Build Plate Adhesion: None
Make Overhang Printable: True
Material: First 11 layers: eSun Pine Green PLA Filament 1.75 mm, Remaining: Prusament Galaxy Black PLA Filament 1.75 mm
Bed:  Wisamic plate (heat activated)
Post Processing: Change Filament Script at layer 11

Cradle Side Coupler, Cradle Side Cover & Cradle Side Jack:
Layer Height: 0.2 mm
Infill Density 100%
Infill Pattern: ZigZag
Nozzle Temperature: 235°C
Build Plate Temperature: 65° C
Initial Layer Flow: 110%
Print Speed: 40 mm/s
Initial Print Speed: 10 mm/s
Retraction Distance: 2 mm
Retraction Speed: 30 mm/s
Build Plate Adhesion: None
Make Overhang Printable: True
Material: AIO Robotics Solid Black PETG Filament 1.75 mm
Bed:  Peopoly plate (glue stick needed for adhesion)

Cradle Pins:
Layer Height: 0.2 mm
Infill Density 100%
Infill Pattern: ZigZag
Nozzle Temperature: 235°C
Build Plate Temperature: 65° C
Initial Layer Flow: 100%
Print Speed: 40 mm/s
Initial Print Speed: 10 mm/s
Retraction Distance: 2 mm
Retraction Speed: 30 mm/s
Build Plate Adhesion: None
Make Overhang Printable: True
Material: AIO Robotics Solid Black PETG Filament 1.75 mm
Bed:  Peopoly plate (Wisamic fails when printing to the same spot and removing hot too much)

Insert Male & Insert Female:
Layer Height: 0.2 mm
Infill Density 20%
Infill Pattern: Cubic 
Nozzle Temperature: 195°C
Build Plate Temperature: 50° C
Build Plate Temperature Initial Layer: 50° C
Initial Layer Flow: 100%
Print Speed: 30 mm/s
Initial Print Speed: 10 mm/s
Retraction Distance: 3 mm  
Retraction Speed: 30 mm/s
Build Plate Adhesion: None
Make Overhang Printable: False
Material: eSun Cool White PLA Filament 1.75 mm
Bed:  Gizmo Dorks PEI Sheet
Post Processing: None